Skip to product information
1 of 1

Helix

HELIX M ONE X Mono Amplifier

HELIX M ONE X Mono Amplifier

Regular price $980.00 AUD
Regular price Sale price $980.00 AUD
Sale Sold out

Small, efficient and uncompromisingly stable - the M ONE X is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE X a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel. And for even more output power, two M ONE X amplifiers can be combined to one single powerhouse thanks to the TwinPower Link.

In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.

Features:

  • Small footprint Class D amplifier with up to 1,180 Watts RMS output power @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel
  • Start-Stop capability down to 6V supply voltage
  • Smart highlevel input with ADEP circuit and Auto Turn-On function
  • Integrated, active crossover with lowpass, bass boost, subsonic and phase control
  • TwinPower Link for connecting two amplifiers in bridged mode
  • Bass remote control for volume adjustment
  • Low heat dissipation thanks to extraordinary efficiency

Special features

Smart highlevel input

The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear - but not with the M ONE X.

The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

Start-Stop capability

The switched power supply of the HELIX M ONE X assures operation even if the batterys voltage drops down to 6 Volts during engine crank.

Scope of delivery:

  • 1 x Amplifier HELIX M ONE X
  • 1 x Cable remote control
  • 1 x Mounting material
  • 1 x Instruction manual

Features

  • Power RMS ≤ 1% THD+N Normal operation
    • (One amplifier) TwinPower Link
      • @ 4 Ohms 1 x 400 Watts
      • @ 2 Ohms 1 x 700 Watts
      • @ 1 Ohm 1 x 1,030 Watts -
      • Bridged @ 4 Ohms -
      • Bridged @ 2 Ohms -
    • (Two amplifiers)
      • - @ 4 Ohms 1 x 1,400 Watts
      • - @ 2 Ohms 1 x 2,060 Watts
  • Max. output power per channel*: Up to 1,180 Watts RMS @ 1 Ohm
  • Amplifier technology Class D
  • Inputs
    • 2 x RCA / Cinch
    • 2 x Highlevel speaker input
    • 1 x Remote In
    • 1 x Remote control input
  • Input sensitivity
    • RCA / Cinch 0.5 - 6 Volts
    • Highlevel 1.1 - 13 Volts
  • Input impedance RCA / Cinch 20 kOhms
  • Input impedance highlevel 9 - 33 Ohms
  • Outputs 1 x Speaker output
  • Output voltage RCA / Cinch -
  • Signal converter for digital input -
  • Frequency response 10 Hz - 250 Hz
  • Bass boost 0 - 12 dB / 30 - 80 Hz
  • Highpass -
  • Lowpass 50 Hz - 250 Hz adjustable
  • Bandpass 10 Hz - 250 Hz adjustable
  • Subsonic 10 Hz - 50 Hz adjustable
  • Phase 0 - 180° adjustable
  • Slope high- / lowpass -
  • Slope subsonic / lowpass 12 / 24 dB/Oct.
  • Signal-to-noise ratio digital input -
  • Signal-to-noise ratio analog input 95 dB (A-weighted)
  • Distortion (THD) 0.20 %
  • Damping factor 150
  • Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
  • Idle current 800 mA
  • Fuse 3 x 40 A Maxi-fuse (APX)
  • Power rating DC 12 V ? 106 A max.
  • Additional features Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control
  • Dimensions (H x W x D) 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06”

* In typical applications as subwoofer amplifier

View full details